Inverter Power Supply Manufacturer - CJN-1000 Transformer 1000W AC to DC Rail Type Single Output Switching Power Supply – C&J
Inverter Power Supply Manufacturer - CJN-1000 Transformer 1000W AC to DC Rail Type Single Output Switching Power Supply – C&J Detail:
Product Parameter
| Type | Technical indicators | |||||||||
| Output | DC voltage | 12V | 24V | 36V | 48V | |||||
| Rated current | 80A | 40A | 27.5A | 20A | ||||||
| Rated power | 960W | 960W | 990W | 960W | ||||||
| Ripple and noise | ＜150mV | ＜150mV | ＜240mV | ＜240mV | ||||||
| Voltage regulation range | ±10% | |||||||||
| Voltage precision | ±1.0% | |||||||||
| Linear adjustment rate | ＜±1% | |||||||||
| Load regulation rate | ＜±1.2% | ＜±1% | ＜±0.5% | ＜±0.5% | ||||||
| Input | Voltage range / frequency | 180-264VAC 47Hz-63Hz 254VDC-370VDC | ||||||||
| Efficiency (typical) | ＞82% | ＞84% | ＞86% | ＞86% | ||||||
| Working current | 220VAC:9.5A | |||||||||
| Shock current | 60A 230VAC | |||||||||
| Start up time | 200ms、50ms、20ms：220VAC | |||||||||
| Overload protection | Type 105%-135% ; constant current output +V0 drop to underpressure point cut off output reset: power up again | |||||||||
| Overvoltage protection | ≥115%-145%Close the output | |||||||||
| Protection characteristics | Short circuit protection | Close the output | ||||||||
| Overtemperature protection | RTH3: Fan often turn,≥90℃ Close the output | |||||||||
| Environmental science | Working temperature and humidity | -10℃~+50℃;20%~90RH | ||||||||
| working temperature and humidity | -20℃ ~+85℃;10%~95RH | |||||||||
| Security | Pressure resistance | Input-output: 1.5kvac input-case: 1.5kvac output-case:0.5kvac lasted for 1 minute | ||||||||
| leakage current | lnput-output 1.5KVAC<6mA；lnput-output 220VAC<1mA | |||||||||
| lsolation resistance | lnput-output and input – shell, output-shell: 500VDC/100mΩ | |||||||||
| Other | Size | 291*132*68mm | ||||||||
| Net weight / gross weight | 2kg/2.1kg | |||||||||
| Remarks | (1) Measurement of ripple and noise: Using a 12″twisted-pair line with a capacitor of 0.1uF and 47uF in parallel at the terminal,the measurement is carried out at 20MHz bandwidth. (2)Efficiency is tested at the input voltage of 230VAC, rated load and 25℃ ambient temperature.Accuracy:including setting error,linear adjustment rate and load adjustmient rate.Test method of linear adjustment rate: testing from low voltage to high voltage at rated Load adjustment rate test method: from 0%-100% rated load.The start-up time is measured in the cold start state, and the fast frequent switch machine may increase the startup time.When the altitude is above 2000 meters, the operating temperature should be lowered by 5/1000. |
|||||||||
Product detail pictures:
Related Product Guide:
Our business aims to operating faithfully, serving to all of our clients , and working in new technology and new machine continuously for Inverter Power Supply Manufacturer - CJN-1000 Transformer 1000W AC to DC Rail Type Single Output Switching Power Supply – C&J , The product will supply to all over the world, such as: Riyadh, Roman, Monaco, The good and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.
By Madge from Buenos Aires - 2017.04.18 16:45
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Astrid from Israel - 2017.09.30 16:36
Write your message here and send it to us
