• 1920x300 nybjtp

High-Performance Truck 4000Watt Car DC to AC Pure Sine Wave Power inverter

Short Description:

  • Inverter is a kind of power supply equipment which converts direct current (storage battery, solarcell, wind turbine, etc.) into alternating current. Because of the high frequency power conversiontechnology, the ferrite transformer is used to replace the old heavy silicon steel transformer.So our inverters are lighter and smaller than other inverters with similar rated power.Theoutput waveform of the inverter is pure sine wave, just like that of the mains.Basically, as long as the load power does not exceed the output power of the inverter, it is possible to drive.
  • Pure sine wave inverter for use with Lead Acid or Lithium Batteries.CJPS Series inverter provide reliable AC power wherever it’s needed.  For use with boats, RVs, cabins and specialty vehicles, as well as alternative energy, back-up and emergency power applications.

Product Detail

Product Tags

Main Advantages

  • High frequency pulse width modulation technology
  • Excellent double-faced circuit board and components
  • High quality and high performance
  • Overload protection
  • Over-current protection
  • High-temperature protection
  • Short-circuit protection
  • Battery reverse connection protection
  • Battery high-voltage&low-voltage protection
  • Built-in fuse protection, etc

 

Technical Data

Model CJPS-4000W
Rated Power 4000W
Peak Power 8000W
Input Voltage 12/24/48VDC
Output Voltage 110/220VAC ± 5%
USB Port 5V 2A
Frequency 50Hz ± 3 or 60Hz ± 3
Output Waveform Pure Sine Wave
Soft Start Yes
THD AC Regulation THD < 3%(Linear Load)
Output Efficiency 94% MAX
Cooling Way Intelligent Cooling Fan
Protection Battery Low Voltage & Over Voltage & Over Load & Over Temperature & Short Circuit
Working Temperature -10°C~+50ºC
Switch information Red: Power Swtich  & Black: AC Output
N.W. Unit (kg) 3.5Kg
Packing Carton
Product Sizes 38.6×17.5×8.2cm
Warranty 1 Year

 

 

Can an inverter convert DC to AC?

Converting Direct Current (DC) to Alternating Current (AC) power is a process that is achieved by using a device called an inverter. Inverters are designed to take the one-way flow of DC and convert it into the oscillating flow of AC. The entire conversion is primarily controlled by a component known as an ‘H-bridge’.


  • Previous:
  • Next:

  • Write your message here and send it to us