CJL3-63 2p 25A RCCB Electronic Type/Electro-Magnetic Type Residual Current Circuit Breaker

Provides protection against earth fault/leakage current and function of isolation
High short-circuit current withstand capacity
Contact position indication
Equipped with finger protected connection terminals
Fire resistant plastic parts endures abnormal heating and strong impact
Automatically disconnect the circuit when earth fault/ leakage current occurs and exceeds the rated sensitivity.
Independent of power supply and line voltage, and free from external interference,voltage fluctuation.

Product Detail

Standard	IEC61008
Mode	Electro-magnetic type, electronic type
Residual current characteristics	A, AC
Pole No	2P, 4P
Rated making and breaking capacity	500A(In=25A,40A) or 10InA(In=63A,80A,100A,125A)
Rated current(A)	25, 40, 63
Rated voltage	AC 230(240)/400(415)
Rated frequency	50/60Hz
Rated residual operating current I△n(A)	0.03, 0.1, 0.3, 0.5
Rated residual non operating current I△no	0.5I△n
Rated conditional short-circuit current Inc	10kA
Rated conditional residual short-circuit Current I△c	10kA
Tripping duration	instantaneous tripping ≤0.3s(0.1)
Residual tripping current range	0.5I△n~I△n
Electro-mechanical endurance	4000 cycles
Connection capacity	Rigid conductor 25mm²
Terminal Connection Height	21mm
Connection terminal	Pillar terminal with clamp
Fastening torque	2.0Nm
Installation	On symmetrical DIN rail 35.5mm
Installation	Panel mounting
Protection class	IP20

Type	In/A	I△n/A	Residual Current (I△) Is Corresponding To The Following Breaking Time (S)
Type	In/A	I△n/A	I△n	2 I△n	5 I△n	5A,10A,20A,50A,100A,200A,500A
general type	any value	any value	0.3	0.15	0.04	0.04	Max Break-time
S Type	≥25	>0.03	0.5	0.2	0.15	0.15	Max Break-time
S Type	≥25	>0.03	0.13	0.06	0.05	0.04	Min non-driving time
The general type RCBO whose current IΔn is 0.03mA or less can use 0.25A instead of 5IΔn.